Before a new seller's first pay check, confirm workweek boundaries, training wage eligibility and how commissions enter the pay calculation.
Key takeaways
- Write down the workweek start day before the first shift.
- Record prior similar or related experience during hiring.
- Track hours of work from the first day.
- Keep commissions separate from hourly or salary amounts.
The 120-hour window discussed here comes from New Jersey's training wage rule. A seller who works fewer hours each week will take longer to reach 120 hours than one who works full weeks, so the same window can end on very different days of the calendar.
This guide is written for managers of small B2B software sales teams who bring on new sellers. A short plan made before the seller starts is easier to follow than a set of fixes made after the first complaint. The sections below take the three pay checks in order, then close with the setup to finish before day one.
Pay check one: how hours are grouped into a workweek
Under Oregon's rule, a workweek is a regularly recurring period of seven consecutive 24-hour periods. That definition sounds simple, but it decides which hours fall into each period you count. The Oregon Bureau of Labor and Industries gives a Sunday-through-Saturday example in its overtime guidance:
> If your workweek runs from Sunday through Saturday, for example, your employee may have worked fewer than 40 hours during that period.
The example shows how a fixed workweek changes the hours counted inside it. For a new seller, the same idea applies to the first pay check. A seller who starts midweek will have a partial first workweek, with fewer days of work in it than a full week has. If you do not plan for that partial week, the first pay check can look wrong even when the hours are right, because the numbers are being read against the wrong boundaries.
Here is how that can play out. Imagine a seller hired on a Thursday, with a workweek that runs from Sunday through Saturday. If the manager counted from the hire date as if it were the start of a full week, the hours for that partial week would be compared against a full week's expectations. Writing the boundary down before the first shift prevents that mismatch. The seller then sees the same boundary on their record that the manager used when calculating the pay.
Plan for it before the seller starts. Decide the start day of the workweek you will use, write it into the seller's file, and use the same start day for every seller on your team. That keeps the hour records consistent, so you can compare one seller's first pay check with another's without wondering whether the periods line up. Consistency also helps the seller. When they ask why their hours look a certain way, you can point to one written definition instead of a memory of how it worked for someone else.
Log hours under the workweek they belong to, not under the pay period you happen to be running. A shift worked on the last day of one workweek belongs to that workweek, even if the pay period it lands in is different. If your pay schedule and your workweek do not line up neatly, write down how you handle the difference for each new seller, and keep that note with the hour records.
This post does not treat the workweek as a pay schedule. The Oregon definition describes a period of time for grouping hours. How often you pay, and when a pay check is due, are separate decisions. Check your own pay schedule against the workweek for each new seller before their first pay check, so that no hours from one workweek are left unaccounted for. For practice sessions, also review the work-hour checks before coaching.
Before the first pay check, confirm three things in writing: the workweek start day, the hours logged for the partial first week, and the pay period those hours land in. Checking these items at this point is much easier than reconstructing a week of shifts after a seller asks about a number.
Pay check two: when the training wage can apply
The State of New Jersey states the rule on its wage and hour laws and regulations page:
> The period during which an employer may pay the training wage to the employee shall be the first 120 hours of work after hiring the employee in employment in an occupation in which the employee has no previous similar or related experience.
Confirm the training wage amount and the rate that applies after the period ends with your state labor agency or employment counsel before you make an offer, so the seller hears the terms from you and not from a guess made on their first day.
It also helps to explain the rule to the seller in plain terms. Show them the running count and the experience note you keep for them. A seller who understands how their own hours are counted is less likely to be surprised by a pay check, and a manager who can show the count has a clear basis for each number.
Illustrative example: a running hour count
Suppose a seller's record shows 40 hours of work, followed by 40 more hours. The running total is 80 hours. After another 40 hours, it reaches 120 hours. These illustrative figures track time only; they do not calculate wages or establish eligibility. Keep the experience note alongside the count before deciding whether the training wage applies.
Keep a running total of hours of work for each new seller from the first day. Update it after every shift, not at the end of the month. A running total tells you when the count reaches 120 hours, and it protects you if the seller later asks why a particular week was treated the way it was. Do not estimate the total from the calendar, because the rule counts hours.
Write down what prior similar or related experience the seller reports during hiring. Ask the seller to confirm the note in writing, and keep it on file with the hour records. The rule turns on experience, so a specific note, such as the kind of work done and roughly when, is more useful to you later than a general statement that the seller is new. This is a record-keeping step, and it does not replace the advice of your state's labor agency or counsel about how the rule applies to a particular hire.
Pay check three: how commissions fit into the regular rate
The California Division of Labor Standards Enforcement states this in its overtime FAQ:
> The regular rate of pay includes a number of different kinds of remuneration, such as hourly earnings, salary, piecework earnings, and commissions.
If you have sellers in more than one of these places, keep each state's rule separate in your notes. Check any regular rate calculation with counsel or your state's labor agency.
For a new seller who is paid partly on commissions, the practical point is that more than one kind of pay sits in the same pay check. Keep hourly or salary amounts separate from commission amounts. Do not merge them into a single line when you record them, because a single total cannot show what went into the regular rate. If you need to answer a question later, separate records let you trace each piece back to its source.
Commissions also have their own dates. If a commission relates to work done in one period and is paid in another, record both dates: the date the work was done and the date the money was paid. That way the record shows what the commission was for, not only when it moved. The same goes for any bonus or other pay tied to a sale, which should be recorded with the matching sale.
Before a new seller earns their first commission, settle a few questions in writing. Which sales count toward pay, and at what point in the sales process does a sale count? How will a split deal be recorded? What happens when a deal is reversed or changes after the pay check has been issued? Those questions are about your own plan, not about the state rules quoted here, so write the answers into the plan and check them against your state's rules and counsel. A written answer protects both the seller and the team when a question comes up months later.
Commissions also interact with the hour records. A seller who spends the first hours of work on training and only later closes deals will have a pay record with hours in it and commission entries that come later. Keep the two streams linked to the same seller and the same dates, so you can explain the pay check without rebuilding the story from emails.
Hours go in one part of the record, the training count goes in another, and commissions go in a third. Each part can be checked against the pay check on its own. Keeping the parts apart is what makes the record useful when a seller asks how a number was produced.
How to review the first pay check with the seller
Review the first pay check with the seller by walking through three things in order: the workweek boundaries, the running hour count, and each kind of pay. This keeps the conversation tied to the record, not to memory or impressions. Use a sales one-on-one agenda to give the conversation a clear place in your schedule.
Start with the workweek boundaries. Show the seller the start day you used and the first partial week it creates. Explain which hours landed in each period and why. If the seller worked a shift that crossed a boundary, show where it was counted and why that choice is consistent with your written plan.
Next, walk through the running hour count. Show the total at the end of each week and the point at which the count reaches 120 hours. If the seller asks why a particular week counts the way it does, the answer should be on the page. If the record is missing a shift, fix the record first and then talk about the pay, so the correction is visible.
Finally, go through each kind of pay on its own line. Hourly or salary amounts come first, then commissions, with the date each was earned and the date it was paid. Keep the explanation simple. If a seller asks how a commission was calculated, check the calculation against your written plan before you answer, and say so if you need to confirm a point with counsel or your state labor agency before giving a firm answer.
Close the review by saving the signed or acknowledged record with the first pay check. A seller who has seen the boundaries, the count, and the pay lines together is in a much better position to spot a question early, and you have a complete file if a question comes up later.
Putting the three checks together: what to set up before day one
Set up all three before a new seller's first day, because each check depends on records that start on that day: workweek dates, a running count of hours of work, and a separate record of each kind of pay. Waiting until the first pay check to build these records means the early hours have to be reconstructed from memory.
Here is the setup to finish before the first shift:
- Record the hire date and the first day of work for each new seller.
- Write down the workweek start day, and use it for every seller on the team.
- Keep a running total of hours of work from the first day, counted apart from calendar days.
- Write down any prior similar or related experience the seller reports, and ask the seller to confirm it in writing.
- Keep each kind of pay separate, including commissions, with the date each was earned and the date it was paid.
- Confirm each rule with your state labor agency or employment counsel before you rely on it.
These records are simple to keep, and they make each of the three checks possible to verify later. They also give you a clear answer when a new seller asks why a pay check looks the way it does. The answer should come from the record, not from a recollection of what happened in the first week.
The three checks come from three different states, and each one holds only where its agency issued it. Use New Jersey's training period for New Jersey, Oregon's workweek definition for Oregon, and California's regular rate statement for California. Do not carry one state's rule into another without checking it first. If you have a new seller in a state not named in this post, start with that state's labor agency before you set the pay plan, and treat the records above as the starting point for that conversation.
A good pay plan for a new seller is not a long document. It is a short written set of choices: the workweek start day, the rule for counting training hours, the way commissions are recorded, and the review step before the first pay check. Each choice should name the state it was checked against. When the plan is written this way, the next manager who picks up a new hire has a clear starting point, and the seller has a record they can read without help.
Today, compare the next new seller's hour record with the written workweek boundary and correct any missing shift before reviewing pay.
Questions before the first pay check
Is the workweek the same as the pay schedule?
No, the workweek groups hours, while the pay schedule determines when pay is due.
What should the seller see during the review?
Show the seller the workweek boundaries, running hour count and separate lines for each kind of pay.
What if a shift is missing?
Correct the hour record before discussing the resulting pay calculation.