Skip across the chapter
Quota Playbook

Sales text rules: 4 checks before a follow-up

Quota Playbook Editorial Team · Published · 11 min read

What to check before the next sales follow-up text

Before a seller sends the first follow-up text, verify four elements: consent, the stop line, quiet hours, and length. These checks ensure the message meets the baseline requirements for consent, opt-out language, timing, and character limits.

Key takeaways

  • Confirm prior express consent for each recipient before sending any follow-up text. Twilio requires it under applicable laws in the jurisdiction where you communicate.
  • Put “Reply STOP to unsubscribe” or another standard opt-out keyword, such as UNSUBSCRIBE or CANCEL, in the first message. Twilio requires this language or an equivalent keyword.
  • Keep sends out of quiet hours, 8PM to 8AM in the contact’s local time zone, as HubSpot defines them.
  • Keep each draft within 160 characters, or 70 with Unicode characters, as Close describes.

The four checks in detail

First, confirm that prior express consent exists. According to Twilio, you must obtain this consent from the recipient in accordance with applicable laws before sending any messages through their services. This is not just a best practice; it is a mandatory precondition for using the messaging platform. Without confirmed prior express consent, the message should not be sent.

Second, look for the required stop line. The initial message must include specific language allowing the recipient to unsubscribe. As stated by Twilio, this includes phrases like “Reply STOP to unsubscribe” or equivalent standard keywords such as UNSUBSCRIBE or CANCEL. If the draft lacks an unsubscribe instruction, it fails the compliance check. The seller must add this language to the very first message they send to that contact. See also saved-reply limits.

Third, check the timing against quiet hours. You must ensure the send time falls outside the restricted window. According to HubSpot, quiet hours are defined as the period from 8PM to 8AM in the contact's local time zone. During this window, SMS laws in some places require that recipients not be contacted. Your review process must flag any drafts scheduled to go out during these evening-to-morning hours. Note that this is a vendor-specific definition of the window; it is distinct from any federal calling-hours rule.

Before a seller sends a follow-up text, verify that prior express consent exists for that specific recipient. According to Twilio, you must obtain this consent in accordance with all applicable laws and regulations in the jurisdiction where the communication occurs. This requirement applies before sending any messages through the Twilio Messaging Services. Do not assume that a previous phone call automatically grants permission for a new text channel; the policy requires explicit agreement for the messaging service itself. If your team uses a different platform, check its specific legal documentation for equivalent consent standards.

The first message sent to a recipient must include specific opt-out language. Twilio states that the initial message needs to say “Reply STOP to unsubscribe” or use an equivalent standard keyword. Acceptable alternatives include STOPALL, UNSUBSCRIBE, OPTOUT, CANCEL, END, REVOKE, or QUIT. Place this line clearly in the body of the text so the buyer sees it immediately. Do not hide the instruction in small print or attach it as a separate attachment; it must be part of the initial message content. This gives the recipient a clear mechanism to revoke their consent if they decide not to continue the conversation.

When a recipient revokes their previously provided consent, also known as an opt-out, the rules for subsequent contact change strictly. According to Twilio, you may deliver one final message to confirm that the revocation has been processed. Any subsequent messages after that confirmation are prohibited. This means the conversation ends after the single confirmation text. Do not send another "we miss you" note, a final offer, or a thank-you message after the stop is processed. The system should flag the number as opted-out to prevent accidental re-engagement by other sellers on the team.

Quiet hours and how long the text can be

Quiet hours are the period from 8PM to 8AM in a contact's local time zone when SMS laws in some places require they not be contacted, according to HubSpot. This window is specific to that source's documentation and does not generalize to every tool or state. If you're sending SMS messages through HubSpot, any SMS messages sent during quiet hours will automatically be deferred until quiet hours are complete. The platform handles this deferral automatically, so the manager does not need to manually hold the message. By default, SMS messages are not sent from HubSpot from 8PM to 8AM in a contact's time zone, as noted in their guide on creating and sending messages. Keep this vendor-specific window separate from any broader statute; it describes what this particular tool does, not a universal legal mandate for all carriers.

Message length follows technical standards rather than strict legal caps. A single SMS message technically supports up to 160 characters, or up to 70 if the message contains one or more Unicode characters (such as emoji or Chinese characters), according to Close. This character limit determines when a message splits into multiple segments. Do not treat the 160-character line as a federal cap on every sales text; it is a technical support limit for a single segment. If your draft exceeds this count, it is longer than the stated single-message capacity. Check your draft against this number before sending, and see text-message caps for related checks. If you use emoji or non-Latin characters, drop your target to 70 characters to avoid an unintended split. These limits are technical specifications for the messaging protocol, not regulatory boundaries that define compliance. Your team should review drafts against these counts to ensure clarity and predictability in delivery.

Verify the time zone of each contact before scheduling a send. * Confirm the contact's local time zone matches the quiet hours window. * Draft texts under 160 characters, or under 70 if using Unicode. * Remember that HubSpot defers messages automatically during its defined window. * Do not assume other tools share this exact deferral behavior.

Filled reference table of the text rules

The following table compares specific messaging rules documented by three publishers. Each row lists the publisher, the rule type, the specific requirement or limit stated on their page, and the source page title. Use this as a quick reference when reviewing a seller’s draft text against the platform’s documented policies.

Publisher Rule Type Specific Requirement or Limit Source Page Title
HubSpot Quiet hours Period from 8PM to 8AM in a contact's local time zone HubSpot Understand SMS quiet hours
Twilio Stop line Initial message needs "Reply STOP to unsubscribe" or equivalent keyword Twilio Twilio Messaging Policy
Close Character line Single SMS supports up to 160 characters, or 70 with Unicode Close A2P 10DLC - Stay Compliant

Check that your team’s current tool matches these documented limits before sending.

Illustrative example: a follow-up text check

A seller drafts a 90-character follow-up that includes an emoji. A message with a Unicode character supports up to 70 characters, so the draft is longer than the stated single-message capacity and needs shortening. The seller adds “Reply STOP to unsubscribe” to the first message and moves any send that falls in quiet hours until after 8AM local time.

Registration, volume, and check-ins

Before you approve a new follow-up, verify that your team’s messaging setup meets the registration standards for US-based traffic. The Close help center states that A2P 10DLC is a new messaging standard introduced by major US carriers that requires all companies sending A2P SMS traffic to be registered. This rule applies specifically to companies messaging in the US and US territories using 10-digit long code phone numbers, such as those used in Close. Because US carriers consider all Close traffic to be A2P, your account must have an approved Trusted Calling (A2P 10DLC) registration to send SMS messages to U.S. phone numbers. If you are sending messages to users repeatedly over a long period of time, the Close stay compliant page advises checking in with recipients at least once every 6 months to ensure they still want to receive messages from you.

Your daily sending capacity depends on the volume tier of your registration. According to Close, low-volume registrations can send up to 6,000 SMS segments a day, while a standard sender can send up to 200,000 segments per day. These figures define the maximum throughput for each tier under the current carrier standards. When planning a multi-touch sequence, confirm which tier your account holds so the team does not exceed the daily segment line. The distinction between low-volume and standard sender limits helps you match your outreach cadence to your approved capacity.

To keep your compliance posture current, schedule a periodic review of your recipient list against the six-month check-in guideline. This step ensures that continued engagement remains voluntary and aligned with the documented expectations for long-term messaging relationships. By confirming that your registration status matches your intended volume and that recipients still want your messages, checked at least every six months, you adhere to the specific operational rules outlined in the platform documentation. Focus on verifying these three elements: your registration approval status, your assigned daily segment limit, and your last check-in date with active recipients.

What these pages do not promise about delivery

Registration and compliance steps do not guarantee that a message reaches the recipient's device. To send SMS messages to U.S. phone numbers, your Close account must have an approved Trusted Calling (A2P 10DLC) registration Close. This requirement applies specifically to the Close platform for traffic directed at United States numbers. It does not establish a universal standard for every messaging tool or every jurisdiction. The approval process confirms eligibility to send within this specific vendor's ecosystem, but it does not validate the technical success of individual transmissions. A manager reviewing a draft text cannot assume that meeting this registration criterion ensures the buyer will see the message on their screen. Delivery remains subject to carrier networks and device availability, factors outside the scope of this single registration rule.

Do not interpret this approval as a shield against potential penalties or fines. The documentation outlines the prerequisite for sending, not the legal immunity from regulatory actions. If a team sends without this approval, they violate the platform's operational rules, but the absence of such a violation does not prove the content is legally compliant in all contexts. Compliance with one vendor's technical setup is distinct from adherence to broader communication laws. Managers should treat this step as a necessary condition for using the tool, not as a sufficient condition for safe practice.

Today, open your next follow-up text and add the stop line before anyone sends it.

Related guides: Buyer privacy: 5 checks before recorded sales coaching · Call handling: 9 rules to check before coaching.

FAQ: Sales text rules before follow-up

Do we need a yes before a sales follow-up text?

Yes, you must obtain prior express consent from the message recipient. This requirement applies in accordance with all applicable laws and regulations in the jurisdiction to which you are communicating Twilio. The rule is tied specifically to sending messages through the Twilio Messaging Services. It does not generalize to every tool or state.

What must the first text say about stopping?

The initial message needs to include specific unsubscribe language. You can use the phrase “Reply STOP to unsubscribe” or an equivalent standard opt-out keyword Twilio. Ensure this line appears in the very first message sent to the recipient.

What does this tool do during quiet hours?

If you send SMS messages through HubSpot, any messages sent during quiet hours are automatically deferred. They remain held until the quiet hours period is complete HubSpot. This deferral happens automatically for SMS messages sent through that specific platform. It is distinct from federal calling-hours rules.

How long can one text be before it splits?

A single SMS message technically supports up to 160 characters. If the message contains one or more Unicode characters, such as emoji or Chinese characters, the limit drops to 70 characters Close. This is a technical support limit for the message structure. It is not a federal cap on every sales text.

Does a stop reply allow one more text?

Yes, after an opt-out you may deliver one final message. This final message confirms that the revocation of their prior consent has been processed Twilio. Use this single opportunity to acknowledge the opt-out clearly.

Sources

  1. Service-dog questions: the 2 you may ask at the office
  2. Buyer privacy: 5 checks before recorded sales coaching
  3. Check 5 text-message caps before a seller texts a buyer
  4. CASL email opt-outs
  5. Backblaze lifecycle rules: 3 settings for overlaps

More plays