Before coaching a multicurrency deal, check its currency, base value and exchange rate, decimal amounts, recurring lines, and confidence-weighted value.
Key takeaways
- confirm which currency the deal uses before you read its value aloud.
- check how the base value and the transaction amount relate on the record.
- check decimal currency amounts exactly as stored.
- split recurring lines from one-time lines before you discuss the total.
- read Expected Value as a confidence-weighted figure, not a sales forecast.
Each check below is tied to a named product's documentation, so read every rule as belonging to that product and no other. The figures you read should show what the record holds, not a forecast of what will close.
Why deal value reads differently by currency
Dynamics 365 Customer Engagement (on-premises) is a multicurrency system, in which each record can be associated with its own currency, according to Microsoft. That sentence places the currency on the individual record, not on the team or the territory. Two deals in the same review can therefore be stated in different currencies, and a total read from memory may not match either record. Treat currency as a field to check on every deal, not as an assumption carried over from the last one you reviewed.
Currency changes what a number means, even when the digits look familiar. An amount that reads $1,000 on one deal does not describe the same value as $1,000 on a deal stated in another currency. A habit formed on single-currency deals can carry over to a second-currency deal without anyone noticing. You read the currency first, then the number.
Your check starts with finding where the deal's currency is stated on the record, and whether a converted figure sits beside it. Before the one-to-one, note the currency, the amount as the record shows it, and any converted figure you can see. Keeping that note beside the deal means you and the rep describe the same number. If the rep quotes a figure from a different view, compare it with your note before the talk moves on.
The sections that follow take the checks in order: currency, base value and rate, decimal currency amounts, recurring lines, and the confidence-weighted figure. Use them as a reading order for the talk. They are not a rulebook for every tool, because each source below describes its own product.
Before the talk: confirm the deal's currency
Currency chosen on the deal
In the add deal modal, you can choose any currency to calculate that deal's value, according to Pipedrive. That choice sits on the deal record, so the currency you read belongs to that one deal. Ask the rep which currency the deal uses, then find the same answer on the record before you accept the figure. Doing it in that order keeps the rep's account and the screen in step.
If the two answers differ, establish the correct currency before deciding whether the record or the rep's answer needs correcting. Do not settle the difference by picking whichever figure sounds more familiar. A deal's currency should match both what the rep entered and what the screen shows, and a mismatch is worth fixing before any amount is discussed.
A currency can also be changed after the first entry. In the deal detail view, click the pencil icon next to your deal value to edit your currency, according to Pipedrive. Open that view and confirm the currency matches what the rep describes. A deal whose currency changed after its first entry deserves a second look before you talk through its amount.
This guide does not carry the Pipedrive steps over to other tools. If your team uses a different sales tool, find that tool's own help page for where the currency is stated, and check it before the talk. Habits from one tool can feel settled in another, so do not assume the same screen exists elsewhere.
Write the currency next to the rep's name in your coaching notes. That line sets the first step of the talk for both of you: which currency the deal uses, and whether the value on the screen is the value the rep entered. A short note like this is easier to read aloud than a full page of figures.
Before the talk: find the base value and the exchange rate
Base value and transaction value
A money attribute in Dynamics 365 Customer Engagement (on-premises) stores the value of the corresponding attribute in a base currency equivalent, according to Microsoft. The documented example is the Account.CreditLimit_Base attribute, according to Microsoft. Read that as two figures on one record: the amount in the deal's own currency, and the base equivalent the system keeps. Your check is to confirm which of those two figures the rep is quoting before the talk begins.
Start from the transaction value the rep entered, then note the base equivalent as a second line. That order keeps the conversation tied to the figure the rep actually entered. The base line then works as a check on that figure rather than a replacement for it. Keep the two lines visibly separate in your notes, so neither figure drifts into the other during the call.
Write the name of each currency next to its figure. A label like that tells a reader which figure belongs to which currency without reopening the record. Short labels are easier to scan during a live call than full sentences, and they hold up when you revisit the notes a week later.
Exchange rate definition
The exchange rate is the value of a transaction currency equal to one base currency, according to Microsoft. That definition runs in one direction, so you should confirm which currency is the transaction currency and which is the base before you use the rate. Applying a rate in the wrong direction can produce an incorrect converted total.
Your notes should hold both currency names beside the rate. Writing them down takes a moment and helps clarify the conversion direction. Once the direction is clear, the rate becomes a figure you can check rather than a number you have to guess at.
Any gap between the transaction amount and the base amount is a question for the one-to-one, not a finding. A gap may come from a conversion you have not seen yet, or from a figure typed in a different currency. Record the question on your one-to-one agenda, and leave the conclusion until the rep has answered it.
Before the talk: check decimal currency amounts
Currency amounts and decimals
The help article says you can also specify the decimal value, with examples such as $125.17, according to Pipedrive. Check the decimal places in the currency amount separately from the exchange rate. Read the digits exactly as they appear, and do not round the amount in your head during the talk. A rounded amount is harder to check against the record later.
Copy the rate from the screen rather than from memory, and write the exact digits in your notes. Note when you read it, since a figure read earlier may not match the one on the screen during the talk. A note with a time and a source protects the talk if someone later asks where a figure came from. Each figure should trace back to the record, not to an estimate.
Reread the rate line slowly before you comment on it. Differences often sit after the decimal point, where a quick glance passes over them. The rep may not notice the change either, so this check belongs to you, and it costs only a few seconds to do properly.
If the rate is not on the screen you are using, ask where it is stated before the talk. Bring the record open to the call, so the rate is visible to both of you. A rate with no recorded source is a claim, not a figure in your notes, and it should not be used in any total you discuss.
Put any follow-up question about the rate on your one-to-one agenda. The question does not have to be settled during the talk itself. What matters is that the answer is written down before you use the rate in any figure you discuss with the rep.
During the talk: split recurring from one-time lines
Recurring and one-time line items
In the following example, a four-month contract starts in month one with a $100 monthly recurring line item and a $50 one-time line item, according to HubSpot. Treat this as an illustration rather than a benchmark for your team. It does show both kinds of line inside one contract, which is the pattern you are checking for in your own deals.
In month two, the contract is updated with an additional $50 monthly recurring line item that takes effect in months three and four, according to HubSpot. That later line is another recurring element in the same contract. Find the month each recurring line starts, so the talk does not treat a later line as if it had been there from the start.
Split the amount into two columns in your notes, with recurring lines in one column and one-time lines in the other. Give each monthly recurring amount its own line and each one-time amount its own line. Write the start month beside any line that begins later, so the timing sits next to the amount it affects.
When a rep describes a deal as a single figure, ask which part is one-time and which part repeats each month. Ask the rep to point to each line in the record, since the total on the screen may combine them. Note the answer beside the total, because a split total is easier to discuss than a figure with no breakdown behind it.
Keeping the two parts separate also makes a later revision easier to find. If the rep changes a line, you can locate it without rereading the whole deal. Put a line reference next to every amount you quote, so the talk stays anchored to the individual lines in the record.
During the talk: read the confidence-weighted value
Confidence-weighted expected value
Close says Expected Value is calculated by multiplying Value X Confidence, according to Close. Its documented example reads $1,000 value X 75% confidence = $750 value, according to Close. Check the figure on the screen against its own inputs using that calculation, and keep both inputs in view beside the result. If the two inputs and the output do not agree with the calculation, that disagreement is worth raising before the talk.
The confidence level is a variable that calculates “Expected Value” revenue on the Opportunities screen, according to Close. Note the confidence level on the deal, alongside the Expected Value you see on that screen. If the Expected Value appears without its confidence level, the confidence behind it is hard to revisit later. Keeping the pair together lets both figures travel into the talk at the same time.
Your team can use that figure as one input among others, which is an editorial choice rather than a documented rule of the product.
When you coach, ask the rep what the confidence level reflects, and write the answer in your notes next to the number. That question ties the confidence level to a reason rather than a habit. If the rep cannot say what it reflects, record that gap as a point for the one-to-one, and revisit it once the rep has checked the deal again.
Illustrative example: read a weighted amount
An illustrative deal has a $100 value and 50% confidence, giving a $50 weighted value. The $50 figure is the result of weighting the $100 amount; it is not another line item to add to the deal. Keep the currency beside both amounts and ask the rep to explain the confidence level before discussing the result.
Your next step today is to open one multicurrency deal a rep owns and run each check in this guide against it before your next one-to-one. Keep your notes for each check with that deal, so the next talk starts from the same record. Note any check you could not complete from the record, because that gap is the first thing to raise with the rep. Use coaching follow-up tasks to organise unresolved questions.
Common questions
What is a base currency on a deal?
The base currency is the currency used for the base equivalent described above for Dynamics 365 Customer Engagement (on-premises). Other systems may hold that figure another way, so check the help page of the tool you use.
Can a rep pick a different currency on a single deal?
Yes, Pipedrive offers the currency choices and editing controls described above. That answer covers Pipedrive only, so check the help page of any other tool before you answer for it.
How does Close work out Expected Value?
Close uses the value and confidence inputs described above. Keep that figure separate from any forecast your team makes, because the source describes a calculation rather than a forecast.
Why split recurring and one-time lines before a deal talk?
Splitting those lines shows which part of a total repeats and which part is one-time. Check the start month beside any later recurring line before discussing the combined amount.
Does a change in confidence change Expected Value?
Yes, for an unchanged nonzero value, a different confidence level gives a different Expected Value. Check both inputs before the talk, and recheck the confidence level whenever you review the Expected Value.
What does the exchange rate mean on a deal?
In the Microsoft definition above, the rate expresses transaction currency relative to one base currency. Keep that direction in mind when you read the rate on a deal.